Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Error markers
•
Enable. Prints the following error markers for those elements
that print beyond the page boundaries:
>> for elements that begin off the right side of the page;
<< for elements that begin at the indicated position but end off
the page;
♦
for elements where the starting position of the command
contains an error other than an off-page error.
Offpage Errors
•
Disable. Does not report errors for elements that start or end
beyond the right edge of the page.
•
Enable. Reports errors for elements that start or end beyond
the right edge of the page.
Barcode Errors
•
Enable. An error message will print when invalid barcode data
is encountered.
•
Disable. VGL will not print an error for illegal barcode data; the
barcode will be skipped.
NOTE: When Barcode Errors is disabled, the VGL emulation will
try to make the best use of invalid data by either truncating
extra digits or adding zeros to the end of barcode data to
meet minimum data length requirements for some
barcodes. Not all errors will be corrected.
Ignore / DB8 Setup
Following are several options which define character filtering and
data bit 8.
Ignore Chars
•
Disable. Character filtering is not enabled.
•
Char 1. Character 1 will be filtered. Select the option "Ignore
ch#1" to specify character 1.
Submenu
117