Unloading Paper From The Power Paper Stacker - Printronix ProLine 5 Series Manual

f. Press DOWN (
g. To start test, press ENTER.
h. To stop test, press ENTER.
i. Press UP + DOWN (
on the display.
j. Examine the print quality. The characters should be fully formed and of
uniform density.
k. If the print quality is good, close the printer cover; press ON LINE to
enable printing.
NOTE: The ENTER key lock and unlock function can be configured to be
other than
Unloading Paper from the Power Stacker
Removing Paper from the Printer:
1. Unload paper from the print mechanism.
2. Open the rear cabinet door.
3. Using the rear control panel, press STACKER UP and wait for the stacker to
reach the top of its travel.
4. Remove the paper from the rear of the printer.
5. Close the rear cabinet door.
Operating the Printer
until Printer Tests "Shift Recycle" appears on the display.
)
+ until ENTER SWITCH "LOCKED" appears
)
+ (See page 4–93).
3–11