Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
LinePrinter Plus Emulation
•
CR = CR + LF. Inserts an extra Line Feed after each Carriage
Return. The next print position will be print position 1 of the next
line.
Auto LF
The Auto LF option defines the printer actions when print data is
received past the forms width setting.
•
Enable. Performs an automatic carriage return and line feed
when data is received past the forms width.
•
Disable. Discards any data past the forms width.
Overstrike
This option enables you to print bold characters.
•
Enable. Turns on bold print. When enabled, overstrike printing
slows down the printer.
•
Disable. Turns off bold print.
Define LF Code
•
LF = LF. Does not perform an automatic carriage return when a
line feed command is received. The next print position will be
the current print position of the next line.
•
LF = CR + LF. Forces an automatic carriage return with each
line feed command received. The next print position is print
position 1 of the next line.
Printer Select
•
Disable. Ignores the ASCII DC1 and DC3 control codes.
•
Enable. Disables the printer when a DC1 control code is
received, and enables the printer when a DC3 control code is
received.
164