Printronix P5005B User Manual page 114

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
IGP/VGL Emulation
Midline PY (includes ^PN)
•
Disable. The Graphics mode Enable command, ^PY, must be
the first three characters of a line.
•
Enable. The ^PY or ^PN can occur anywhere in a line.
Print Quality
•
High. ALPHA text and barcodes are printed in dark mode at
120 x 72 dpi.
•
Data Processing. ALPHA text and barcodes are printed in
normal mode at 120 x 72 dpi. This mode should be set if the
highest speed is desired.
Expanded Font
•
Scalable. These expanded characters have rounded edges.
•
Block. These are block characters compatible with IGP-X10
printers.
LP+ Font
•
Disable. The IGP/VGL uses its default half-dot font, which is
slightly different from the standard bitmap font used by LP+ at
12, 13, 15 and 17 cpi.
•
Enable. The IGP/VGL uses the same font as used by LP+ at all
cpi.
MSI Check Digit
•
Print. The check digit is appended at the end of the printable
data field for MSI barcodes.
•
Don't Print. The check digit for MSI barcodes does not print.
I25 Selection
•
Leading Zero. When you enter an odd number of data in an
Interleaved 2/5 barcode, a leading zero is automatically added
to the printable data field.
114