Printronix P5005B User Manual page 158

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
LinePrinter Plus Emulation
Character Set
Specifies a character set as shown in the "P-Series Character Set
Menu" on page 159. To use one of these sets, choose the desired
group heading (such as European Sets) and press ENTER. Then
choose the desired set within that group (such as Roman 8) and
press ENTER. Both the group and the desired set will be starred to
indicate your selection. Character sets are shown in detail in the
Character Sets Reference Manual .
SFCC d Command
•
Even dot plot. This option interprets SFCC d Command as
even dot plot.
•
Double high. This option interprets SFCC d Command as
double high. Select this option for backward compatibility.
PSeries Dbl High
Allows printing compatibility between the current and older model
printers.
•
Normal. This is normal Double High printing for current model
printers.
•
P3/4/6/9 Compat. Where older printers printed two dot rows
higher, this option allows for compatibility by raising the print
two dot rows to match the current models dot row value (two
dot rows lower).
FF Valid at TOF
•
Enable. Performs a form feed when the host sends a Form
Feed command and the printer is at the top of form.
•
Disable. Will not perform a form feed when the host sends a
Form Feed command and the printer is at the top of form.
158