Printronix P5005B User Manual page 58

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 3
The Control Panel
VIEW / EJECT
Executes the view or eject function, depending on how long the key
is pressed
function is executed. When it is held down for longer than 1/2
second, the eject function is executed.
View Function — Press and release VIEW/EJECT quickly to move
the last data printed to the tractor area for viewing. While in the
view state, the
or down in 1/72 inch increments. Press VIEW/EJECT a second
time to move back to the adjusted print position.
Eject Function — In offline mode, holding VIEW/EJECT down for
longer than 1/2 second will invoke the eject function. The amount of
paper advanced is determined by the eject mode selected in the
configuration menu; the standard setting will slew the paper two 11-
inch pages. See page 190 for a detailed description of each of the
eject functions.
NOTE: Pressing ON LINE also moves the paper back to the
CANCEL
In offline mode, this key cancels all data in the print buffer, if
enabled in "MAINT / MISC" on page 188. The print buffer is cleared
without printing any of the data and the current paper position is set
as the top-of-form. If this function is disabled, the CANCEL key will
be ignored.
NOTE: Use of this key will cause loss of data .
58
When the VIEW/EJECT key is pressed quickly the view
.
= >
or keys can be pressed to adjust the paper up
adjusted print position and returns the printer to online
mode. If you press PAPER ADVANCE while in view or
eject function, the paper will return to the adjusted print
position and then perform the paper advance motion.