Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
HOST INTERFACE
Prime Signal
•
Enable. The parallel port will perform a warm start (reboot) if
the host asserts the Prime Signal.
•
Disable. The parallel port will not perform a warm start (reboot)
if the host asserts the Prime Signal.
TOF Action
•
Reset. A form feed is performed before a warm start when the
prime signal is asserted from the host. This setting is used only
if the Prime Signal parameter is enabled.
•
Do Nothing. Nothing occurs before a warm start when the
prime signal is asserted from the host.
Buffer Size in K
This option configures the amount of memory allocated for the
IEEE 1284 parallel port buffer. You can specify between 1 and 16
Kbytes, in 1-Kbyte increments.
210