Set The Top-of-Form
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Every time you load paper, you must tell the printer where the top-
of-form is. This procedure must be performed the first time paper is
introduced into the printer, as well as every time new paper is
loaded.
Procedure
1. Be sure the forms thickness lever is lowered. If the printer is off,
set the power switch to I (On).
2. Press ON LINE to place the printer in offline mode. The LCD
will then display "OFFLINE / CONFIG. CONTROL."
3. Press PAPER ADVANCE several times to ensure the paper
feeds properly beyond the tractors and over the lower paper
path. Ensure the paper folds properly in the stacking area.
4. Raise the forms thickness lever (1) as far as it will go. This
allows you to turn the vertical position knob (2) freely in order to
align the top-of-form.
Procedure
2
1
51