Printronix P5005B User Manual page 63

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
4. Feed the paper up through the paper slot (see Figure 11). It
may be easier to feed one corner of the new paper up through
the slot first. When this corner can be grasped from the top,
rotate the paper back to the normal position.
NOTE: If you are using thick, multi-part forms and are unable to
load the new paper over the existing paper, go to step 14.
5. Hold the paper to prevent it from slipping down and through the
paper slot.
3
6
6. Pull the new paper (3) above and behind the ribbon mask, but
in front of the existing paper (4). The ribbon mask location is
shown on the ribbon path diagram (6). If necessary, gently
press the existing paper back.
7. Align the top edge of the new paper with the top perforation of
the existing paper (5).
8. Load the new paper over the existing paper.
Open and load the tractors one at a time to prevent the paper
from slipping.
NOTE: Make sure that the top edge of the new paper lines up with
the top horizontal perforation of the last page.
Reloading Paper
4
5
63