Change Case; Image Buf Size - Printronix P5005B User Manual

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
Coax/Twinax Emulation

Change Case

Specifies the font as Mono or Dual case. This option is available
only in non-SCS mode. The host will be notified of the change when
the printer is placed ONLINE. Mono Case prints the same as Dual
Case if the character set is one of the following "right to left" sets:
Katak., Hebrew, Old Hebrew, and Farsi.
SCS (System Network Architecture Character String) Mode is
controlled by the host computer.
Set Text Orientation
Specifies the direction in which characters are printed on the page.
This allows the printer to print languages which are printed right to
left instead of left to right.
•
Control By Host. Allows printers configured as a 4234 to use
the "Set Text Orientation" command from the host.
•
Left To Right.
•
Right To Left. When a right to left language is selected, the
host will be notified of print direction changes when the printer
is placed ONLINE.

Image Buf Size

Allows you to select 4K or 2K as the image buffer size. This option
is only valid when the printer emulates the 3287. For the 4234
emulation, the buffer size is fixed at 4K. A POR status is sent to the
host when the printer is placed ONLINE.
Intervention Req
•
Send to Host. The printer sends a signal to the host computer
when a printer fault or hold mode time-out occurs.
•
Do Not Send. No signal will be sent to the host computer.
130