Dataproducts
(from page 195)
Data Bit 8
Enable*
Enable*
Disable
Disable
TOF Action
Reset*
1*
Do Nothing
(1-16)
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Dataproducts (Standard & Long Lines) Submenu
Dataproducts (Standard & Long Lines)
Submenu
PI Ignored
Data
Polarity
Standard*
Standard*
Inverted
Inverted
Buffer Size
in K
Data Bit 8
•
Enable. Allows access to the extended ASCII character set.
•
Disable. The printer interprets bit 8 of each incoming data
character as a zero, regardless of its actual setting.
PI Ignored
The PI (Paper Instruction) signal is used to control vertical paper
motion.
•
Enable. Causes the printer to interpret the eight data lines as
DVFU commands when the PI signal is true.
•
Disable. Ignores the PI signal and treats the data as characters
or control codes.
* = Factory Default
Response
Latch Data
Polarity
On
Middle*
Disable*
Trailing
Enable
Leading
Prime Signal
201