Lac Option; Set Text Orientn - Printronix P5005B User Manual

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
•
Disable. Ignores the SGEA command from the host. The
printer does not stop when an error is detected; instead, it
substitutes the character selected in the Graphic Chek Code
parameter.
Graphic Chek Code
Specifies the replacement character to print in place of any
unprintable character that is received from the host. Choose a hex
character from 40 through FE. The character becomes the printer
default when:
•
The printer is powered off and then powered on.
•
An SGEA command specifies to use the operator panel default.
•
The Graphic Chek Err parameter is disabled.

LAC Option

Allows the host system to load alternate character images into the
printer. This may be used for designing graphics, barcodes, and
charts, or for printing in foreign languages.
•
Enable. Prints the LAC character as defined.
•
Disable. Ignores the LAC definition from the host and prints
from the currently selected character set.

Set Text Orientn

Specifies the direction in which characters are printed on the page.
This allows the printer to print languages that are printed right to left
instead of left to right.
Host Override
Determines whether the printer accepts certain commands sent by
the host, or continues to use the current operator panel settings.
•
Disable. Allows these host commands to override operator
panel settings: line length, forms length, lines per inch (LPI),
characters per inch (CPI), print quality, and text orientation.
Note the information appearing on the message display may
Twinax Emulation Menu
139