Printronix P5005B User Manual page 248

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Appendix B
Simple Tear
When the VIEW/EJECT key is pressed a second time, the paper
reverses the exact distance it slewed. For Simply Tear mode to
work properly:
•
The form length must be set correctly.
•
The Top-of-Form must be set to the actual top of form.
•
There must be a space of at least 2.66 inches from the top of
form (which can be used for pre-printed headers) to prevent the
paper from falling out of the tractors when reversing. The paper
motion is shown in Figure 15.
Tear Position
Print Position
Tear Position
Print Position
248
Header
2.66" minimum
Pre-Printed
The form must have a minimum
Page 1
header of 2.66 inches.
Header
Pre-Printed
Page 2
Header
Pre-Printed
First Line
The forms are printed, skipping
......
Last Line
the header area at the top of
Page 1
each page.
Header
Pre-Printed
NOTE: It is possible to have the
printer print the header
information.
Page 2
Figure 15. Simple Tear Mode