Print Quality - Printronix P5005B User Manual

Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es
Chapter 4
IGP/PGL Emulation
Printer PI Line
This option enables the IGP to send PI instructions to the printer to
slew the form.
•
Enable. Send the PI instructions to the printer (LinePrinter
Plus) during form slew. This is IGP-X00 compatible.
•
Disable. Do not send PI instructions to the printer. LFs are sent
instead.

Print Quality

•
High. The emulation prints at 120 x 72 dpi, but all
alphanumerics and barcodes are automatically printed in dark
mode.
•
Best. The emulation prints at 120 x 144 dpi and dark mode,
which produces a higher resolution, better looking print image.
•
Data Processing. The emulation prints at 120 x 72 dpi and lets
you choose between normal alphanumerics and barcodes and
dark mode alphanumerics and barcodes. This mode should be
set if the highest speed is desired.
Power On S-Mode
This option instructs the PGL to behave similar to older versions of
the IGP with respect to certain commands.
All new users with new applications should select "0", the default
option. Selecting this mode insures the printer will behave as
described in this manual.
Power On S-Mode sets the printer in an SMODE compatibility state
at power-up. The default is 0 (disabled, no power-on mode). To use
this feature, select a mode from 1 through 5, which puts IGP/PGL in
an SMODE state according to the compatibility mode set. If the
compatibility mode set is None, then MVP is assumed by default.
For more information, see the "Scaling" section of the IGP/PGL
Programmer's Reference Manual.
104