Attach The Output Basket (Pedestal Model)
Attach The Output Basket (Pedestal Model)
$
$
1. Place the output basket in the holes in the back of the printer.
2. Screw the ground wire attached to the output basket to the
printer.
Remove The Shipping Restraints From
The Optional Power Stacker
This section only applies to printers with the power stacker
installed.
Special packaging protects the power stacker mechanisms from
damage during shipment. This section describes how to remove
the shipping restraints before you operate the printer.
Save the packaging materials. They need to be reinstalled to avoid
causing damage if you decide to move or ship the printer. To
reinstall the packaging materials, reverse the steps in this section.
31
Mantenimiento Periféricos Informáticos SL C/Canteras, 15 28860 Paracuellos de Jarama Tel: 00 34 917481604 WEB: https://mpi.com.es