5
Configure device options and
preferences
Topics covered in this chapter:
•
•
•
•
•
•
5.1
Configure the transmitter display
You can control the process variables shown on the display and a variety of display
behaviors.
The transmitter display parameters include:
•
•
•
•
•
•
•
5.1.1
Configure the language used for the display
Display
ProLink II
ProLink III
Field Communicator Configure > Manual Setup > Display > Language
Overview
Display Language controls the language used for process data and menus on the display.
Procedure
Select the language you want to use.
Configuration and Use Manual
Configure the transmitter display
Enable or disable operator actions from the display
Configure security for the display menus
Configure response time parameters
Configure alarm handling
Configure informational parameters
Display Language
Display Variables
Display Precision
Update Period
Auto Scroll and Auto Scroll Rate
Backlight
Status LED Blinking
OFF-LINE MAINT > OFF-LINE CONFG > DISPLAY > LANG
ProLink > Configuration > Display > Display Language
Device Tools > Configuration > Transmitter Display > General
Configure device options and preferences
77