Acura NSX 1997 Service Manual page 76

Main Menu
Cylinder Heads
Removal (cont'd)
12. Remove the engine cover stay from the strut brace,
then set the engine cover stay between the engine
cover and rear hatch latch (NSX-T open top).
CAUTION: Use a shop towel to avoid damaging
painted surfaces.
SHOP
TOWEL
13. Relieve fuel pressure (see
Do not smoke while working on fuel
system; keep open flame or spark away from work
area. Drain fuel only into an approved container.
14. Remove the fuel feed pipe and fuel return hose (see
page 5-5).
15. Remove the evaporative emission (EVAP) control
canister hose and brake booster vacuum hose (see
page 5-5).
16. Disconnect the breather pipe and vacuum hose, then
remove the air cleaner housing.
AIR CLEANER
HOUSING
Table of Contents
section 11).
BREATHER
PIPE
17. Remove the hoses, then remove the expansion tank
(see page 5-5).
18. Remove the radiator hoses and heater hose (see
page 5-6).
19. Disconnect the two connectors, then remove the
control box (see page 5-6).
20. Remove the intake manifold plate and top cover.
INTAKE MANIFOLD
PLATE
TOP COVER
21. Remove the fuel injector covers.
FUEL INJECTOR
COVER