Table of Contents
Advertisement
Main Menu
Transmission
Reassembly
NOTE: Coat all parts with ATF.
1.
Reassemble the valve bodies in the following numbered sequence.
CAUTION: To prevent stripping the threads, press down on the accumulator cover while installing the bolts.
Table of Contents
NOTE: Install the ATF pump driven gear with
its chamfered side facing down.
NOTE: Make sure the pump drive gear
rotates smoothly in the normal operating
direction and the pump shaft moves
smoothly in the axial and normal operating
directions.
CAUTION: If the pump gear and pump
shaft do not move freely, loosen the valve
body bolts, realign the shaft, and then
retighten to the specified torque. Failure to
align the pump shaft correctly will result in
seized pump gear or pump shaft.
Advertisement
Chapters
Table of Contents
Troubleshooting
