Acura NSX 1997 Service Manual page 588

Main Menu
6. Measure the caster on the both sides, and adjust the
caster to specifications.
Caster:
Loosen the pivot adjuster mounting nuts (self-
locking nuts) under the compliance pivot, and
adjust the caster by turning the adjusting cam.
SELF-LOCKING
NUT
Replace.
83 N-m
(8.5 kgf-m, 61 Ibf-ft)
7. Remeasure and, if necessary, adjust the camber and
toe on the left side first, then the right side.
Front Specifications
Toe-out: 3.5 ± 1.0 mm (5/32 + 1/16 in)
Camber: -0°20' ± 30'
Caster: 8°00' + 45'
Table of Contents
ADJUSTING CAM
Corrosion resistant bolt/nut