Acura NSX 1997 Service Manual page 51

Table of Contents

Engine Installation:

Install the engine in the reverse order of removal. Reinstall

the mount bolts/nuts in the following sequence. Failure to

follow these procedures may cause excessive noise and

vibration, and reduce bushing life.

Install the rear mount, then tighten the bolts on the

transmission side.

NOTE: Do not tighten the mounting bolt.

Install the front mount, then tighten the bolts in the

numbered sequence as shown

Table of Contents

Install the subframe, then tighten the subframe-to-

body mounting bolts (see

NOTE: Align the bolt holes of the beam brackets

and body with a tapered punch.

Install the transmission mount, then tighten the bolts

on the transmission side.

NOTE: Do not tighten the mounting bolt.

Chapters

Table of Contents