Acura NSX 1997 Service Manual page 132

Main Menu
Crankshaft
Installation (cont'd)
Apply liquid gasket
along the broken line.
OIL PUMP
Apply liquid gasket
along the broken line.
• Do not install the parts if five minutes or more
have elapsed since applying liquid gasket.
Instead reapply liquid gasket after removing old
residue.
• After assembly, wait at least 20 minutes before
filling the engine with oil.
9. Install the oil pass pipe and joint.
10. Install the baffle plate.
11. Install the oil screen.
12. Install the oil pan (see page 8-10).
CAUTION: Whenever any crankshaft or connec-
ting rod bearing is replaced, after reassembly, run
the engine at idling speed until it reaches normal
operating temperature, then continue to run for
approximately 15 minutes.
Table of Contents
LEFT
SIDE COVER