Acura NSX 1997 Service Manual page 468

Table of Contents

Transmission Housing Bearings

To remove the mainshaft, countershaft and secondary

shaft bearings from the transmission housing, expand

each snap ring with the snap ring pliers, then push the

bearing out.

NOTE: Do not remove the snap rings unless it's

necessary to clean the grooves in the housing.

Table of Contents

Expand each snap ring with the snap ring pliers, insert

the new bearing part-way into it, then release the pli-

ers. Push the bearing down into the transmission until

the ring snaps in place around it.

Chapters

Table of Contents