Acura NSX 1997 Service Manual page 75

Main Menu
6. Remove the rear exhaust manifold (M/T).
-1. Remove the muffler (see page 5-9).
-2. Remove the rear beam rod B.
-3. Disconnect the rear secondary heated oxygen
sensor (rear secondary HO2S) connector, then
remove the rear TWC.
-4. Remove the rear exhaust manifold covers.
-5. Disconnect the rear primary heated oxygen
sensor (rear primary HO2S) connector, then
remove the rear exhaust manifold.
REAR EXHAUST
MANIFOLD
REAR TWC
Table of Contents
REAR BEAM
ROD B
GASKET
Replace.
REAR PRIMARY
HO2S
CONNECTOR
REAR SECONDARY
HO2S CONNECTOR
7. Remove the engine under guard, then remove the
front exhaust pipe A (A/T).
GASKETS
Replace.
8. Remove the rear exhaust pipe A (A/T).
REAR
EXHAUST
PIPE A
9. Remove the engine oil cooler base assembly (see
page 6-15).
10. Lower the car.
11. Remove the strut brace (see page 5-3).
FRONT EXHAUST
PIPE A
GASKETS
Replace.
(cont'd)