Table of Contents
Advertisement
Main Menu
Main Valve Body
Disassembly/Inspection/Reassembly
NOTE:
Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air.
Blow out all passages.
Replace valve body as an assembly if any parts are worn or damaged.
Check all valves for free movement. If any fail to slide freely, see Valve Body Repair on page 14-123.
Coat all parts with ATF before reassembly.
Adjust and select the manual valve detent spring when the manual valve or manual valve detent spring is replaced.
See page 14-160.
CAUTION:
Do not use a magnet to remove the check balls; it may magnetize the balls.
Table of Contents
Advertisement
Chapters
Table of Contents
Troubleshooting
