Acura NSX 1997 Service Manual page 383

Main Menu
Description
Hydraulic Flow (cont'd)
Positions
1. 1st Gear
The flow of fluid through the torque converter circuit is the same as in
Line pressure (1) becomes line pressure (4) and 1st clutch pressure (10).
The 1st clutch pressure is applied to the 1st clutch and 1st accumulator, and the vehicle will move as engine power is
transmitted.
Line pressure (1) becomes modulator pressure (6) by the modulator valve and travels to each shift valve.
The 1-2 shift valve is moved to the right side because the shift control solenoid valve A is turned OFF and B is turned
ON by the TCM.
Line pressure (1) also flows to the throttle valve.
NOTE: When used, "left" or "right" indicates direction on the hydraulic circuit.
Table of Contents
position.