Main Menu
Valve Caps
Description
• Caps with one projected tip and one flat end are in-
stalled with the flat end toward the spring.
• Caps with a projected tip on each end are installed
with the smaller tip toward the spring. The small tip
is a spring guide.
• Caps with one projected tip and hollow end are in-
stalled with the tip toward the spring. The tip is a
spring guide.
Table of Contents
• Caps with hollow ends are installed with the hollow
• Caps with notched ends are installed with the notch
• Caps with flat ends and a hole through the center are
• Caps with flat ends and a groove around the cap are
end away from the spring.
toward the spring.
installed with the smaller hole toward the spring.
installed with the groove side opposite the spring.