Acura NSX 1997 Service Manual page 405

Main Menu
4. Select a new shim from the chart below.
NOTE: Identification color is painted on the side of
the shim.
Table of Contents
5. Apply liquid gasket to both sides of the linear
solenoid shim as shown. Use liquid gasket Part No.
08718-0001.
CAUTION:
• Install the linear solenoid within 10 minutes of
applying the liquid gasket.
• After installation, wipe off any liquid gasket that
squeezed out from around the linear solenoid
shim.
NOTE:
• Check that the mounting surfaces are clean and
dry before applying liquid gasket. Degrease if
necessary.
• Apply the liquid gasket evenly.
• Do not install the parts if 10 minutes or more has
passed since you first applied the liquid gasket.
If 10 minutes has passed, reapply liquid gasket
after removing the residue.
• Wait at least 30 minutes before filling with ATF.
6. Install the linear solenoid and the shim to the trans-
mission housing.