Acura NSX 1997 Service Manual page 487

Main Menu
Differential
Illustrated Index
NOTE:
• If the parts marked with an asterisk ( * ) are replaced, the bearing preload must be adjusted (see page 15-12).
• If replacement is required, always replace the limited slip differential clutch set.
*75 mm THRUST SHIM
Selection, Adjustment, page
*BEARING OUTER RACE
Replacement, page 15-12
Inspect for wear and damage.
FINAL DRIVEN GEAR
Inspect for wear and damage.
102 mm WASHER
CLUTCH PLATES
THRUST NEEDLE BEARING
Inspect for wear and damage.
Table of Contents
15-13
TAPERED ROLLER BEARING
Replacement, page
Inspect for wear and damage.
DIFFERENTIAL HOUSING COVER
Inspect for wear and damage.
112 mm SHIM
Adjustment,
page
CLUTCH DISCS
DIFFERENTIAL HOUSING
Inspect for wear and damage.
8 x 1.0 mm SPECIAL BOLTS
39 N-m (4.0 kgf-m, 29 Ibf-ft)
15-5
SPRING PLATE
CLUTCH DISC
65 mm SHIM
Adjustment, page
WASHER
15-11
THRUST NEEDLE BEARINGS
Inspect for wear and damage.
112 mm SHIM
65 mm SHIM
WASHER
STOP PLATE
* BEARING OUTER RACE
Replacement, page 15-12
Inspect for wear and damage.
15-8
CENTRAL GEAR
Inspect for wear and damage.
WASHERS
CARRIER ASSEMBLY
Inspect for wear and damage.
TAPERED ROLLER BEARING
Replacement, page
Inspect for wear and damage.
*90 mm WASHER
*OIL GUIDE RING
Replacement, page
15-5
15-12