Acura NSX 1997 Service Manual page 404

Main Menu Table of Contents
Linear Solenoid
Replacement
NOTE: Select the appropriate shim when the linear sole-
noid is replaced.
1. Remove the linear solenoid and shim from the trans-
mission housing.
2. Clean the mounting surface.
3. Measure the distance between the mounting surface
of the linear solenoid and the throttle valve body.
Clean the mounting
surface.
LINEAR SOLENOID
SHIM
THROTTLE
VALVE BODY
LINEAR SOLENOID INSTALLATION DISTANCE:
23.5 - 23.7 mm (0.925 - 0.933 in)
NOTE: If the measurement of distance is 21.6 mm
(0.850 in), select the shim of 2.0 mm (0.079 in) to ob-
tain the installation distance of 23.6 mm (0.929 in).
Measurement of
distance.
LINEAR SOLENOID
LINEAR SOLENOID
INSTALLATION
DISTANCE
Measurement of distance