Table of Contents
Advertisement
Main Menu
Upshift
Downshift
3. Accelerate to about 35 mph (57 km/h) so the transmission is in 4th, then shift from
cle should immediately begin slowing down from engine braking.
CAUTION: Do not shift from
tion at speeds over 45 mph (73 km/h); you may damage the transmission.
4. Check for abnormal noise and clutch slippage in the following positions.
(1st Gear) Position
Accelerate from a stop at full throttle. Check that there is no abnormal noise or clutch slippage.
Upshifts should not occur in this position.
(2nd Gear) Position
Accelerate from a stop at full throttle. Check that there is no abnormal noise or clutch slippage.
Upshifts and downshifts should not occur in this position.
(3rd Gear) Position
Shift to
position, then start the car in 1st or 2nd gear and shift to 3rd gear with the shift switch.
Accelerate at full throttle. Check that there is no abnormal noise or clutch slippage.
(Reverse) Position
Accelerate from a stop at full throttle, and check for abnormal noise and clutch slippage.
5. Test in
(Parking) Position.
Park the vehicle on a slope (approx. 16°) and apply the parking brake, then shift into
vehicle should not move.
Table of Contents
position to
position at speeds over 76 mph (123 km/h) or from
position to
position. The vehi-
position to
position. Release the brake; the
posi-
Advertisement
Chapters
Table of Contents
Troubleshooting
