Main Menu
Transmission Control Module (TCM)
Replacement
SRS components are located in this area. Review the
SRS component locations, precautions, and procedures
in the SRS
(section
24) before performing repairs or ser-
vice.
1.
Remove the seat back panels (see
2.
Remove the connector holder from the TCS control
unit, and disconnect the antenna lead.
3. Remove the TCS control unit.
NOTE: Do not disconnect the connectors from the
TCS control unit.
Table of Contents
section
20).
4.
Disconnect the A (26P) and B (22P) connectors from
the TCM, then remove the TCM.