Acura NSX 1997 Service Manual page 473

Main Menu
3. Assemble the transmission
numbered sequence.
NOTE: Before installing the O-rings, wrap the
shaft splines with tape to prevent damage to the O-
rings.
Table of Contents
in the following
4. Set the parking brake lever in the
verify that the parking brake pawl engages the
parking gear.
5. If the pawl does not engage fully, check the parking
brake pawl stopper clearance as described on page
14-160.
6. Tighten the lock bolt, then bend over the lock tab.
7. Install the special tool as shown, then shift to
position.
MAINSHAFT HOLDER
07924-PJ4010A
position, then