Acura NSX 1997 Service Manual page 403

Main Menu
Linear Solenoid
Test
1. Remove the linear solenoid connector.
2. Measure the resistance between the A and B terminal.
STANDARD: 5.0-5.5 Ω (at 70°F, 20°C)
LINEAR
SOLENOID
3. Replace the linear solenoid if resistance is out of
specification.
4. Connect the No. 3 terminal of the linear solenoid con-
nector to the battery positive terminal and the No. 1
terminal to the battery negative terminal. A clicking
sound should be heard.
5. If not, replace the linear solenoid.
Table of Contents
TERMINAL SIDE OF
MALE TERMINALS