Acura NSX 1997 Service Manual page 275

Main Menu
EVAP Control Canister Removal/Installation
1. Remove the air cleaner housing.
2. Remove the engine compartment fuse/relay box
mounting bolts and harness clip.
HARNESS CLIP
3. Remove the EVAP control canister bracket mount-
ing bolts.
4. Disconnect the hoses and connector from the EVAP
control canister.
5. Remove the dust filter from the dust filter bracket.
6. Remove the EVAP control canister and brackets.
Table of Contents
AIR CLEANER
HOUSING
EVAP CONTROL
CANISTER
DUST FILTER
BRACKET
DUST FILTER
7. Install the EVAP control canister in the reverse order
of removal.
EVAP CONTROL
CANISTER
BRACKET