Table of Contents
Advertisement
5. Manual shifting
If the 5 existing digits on the 7-segment display are not sufficient to display a parameter value, the display
first shows just 5 digits (see Fig. 8.1). To indicate that more digits are concealed to the right or left of this
"window", the right-hand or left-hand digit flashes. By pressing the <P>+<Down> or <P>+<Up> key, you
can shift the window over the remaining digits of the parameter value. As an orientation guide, the position
of the right-hand digit within the overall parameter value is displayed briefly during manual shifting.
Example: Parameter value "208.173"
"208.17" is displayed when the parameter is selected. When the
P and LOWER keys are pressed, "1" appears briefly followed by
"08.173", i.e. the right-hand digit 3 is the 1
parameter value.
When the P and RAISE keys are pressed, "2" appears briefly
followed by "208.17", i.e. the right-hand digit 7 is the 2
in the parameter value.
Fig. 8.1
Shifting the PMU display for parameter values with more than 4 digits
6. Press the P key to return to the parameter number level from the parameter value level.
Siemens Energy & Automation
SIMOREG DC Master Base Drive Panel Operating Instructions
st
position in the
nd
position
P
+
P
+
8-5
Advertisement
Table of Contents
