Table of Contents
Advertisement
Converter software version:
As these Operating Instructions went to print, SIMOREG 6RA70 DC Master converters were being delivered
from the factory with software version
These Operating Instructions also apply to other software versions.
Earlier software versions: Some parameters described in this document might not be available in the software
Later software versions:
The latest software version of the SIMOREG DC Master can be read in parameters r060 and r065.
The latest software version is available at the following Internet site:
http://www4.ad.siemens.de/view/cs/en/8467834
The reproduction, transmission or use of this document or contents is
not permitted without express written authority. All rights, including
rights created by patent grant or registration of a utility model or design,
are reserved.
We have checked that the contents of this publication agree with the
hardware and software described herein. Nonetheless, differences
might exist and therefore we cannot guarantee that they are completely
identical. The information given in this publication is reviewed at regular
intervals and any corrections that might be necessary are made in the
subsequent printings. Suggestions for improvement are welcome at all
times.
© Siemens Energy & Automation 2006 All rights reserved
installed.
2.2
(i.e. the corresponding functionality is not available on the converter) or some
parameters will have a restricted setting range. SIMOREG 6RA70 Base Drive Panel
series requires software version 1.8 or later.
Additional parameters might be available on the SIMOREG DC Master (i.e. extra
functions might be available which are not described in these Operating Instructions)
or some parameters might have an extended setting range. In this case, leave the
relevant parameters at their factory setting, or do not set any parameter values which
are not described in these Instructions !
SIMOREG ® is a registered trademark of Siemens
Advertisement
Table of Contents
