Inova SV 125 Operating Manual page 352

Alarm 60400
Axis moves to position axis insertion rod
Axis moves to position axis insertion tube
Axis moves to position axis needle stroke
Axis moves to position axis pickup station nest
Axis moves to position axis pump rotation
Axis moves to position axis pump stroke
Axis moves to position axis swivel arm
Axis moves to position X- -axis
Axis moves to position Y- -axis
Cause
The indicated axis runs to a defined
position after a fault has occurred.
Alarm 60500
Homing active axis pickup station nest
Homing active axis insertion rod
Homing active axis insertion tube
Homing active axis needle stroke
Homing active axis pump rotation
Homing active axis pump stroke
Homing active axis swivel arm
Homing active X- -axis
Homing active Y- -axis
Cause
The indicated axis performs homing.
Version 1.0
8--18
Action
The message is automatically reset
when the indicated axis has reached
the defined position.
Action
The message is reset automatically
when homing has ended.
The machine restarts automatically.
Troubleshooting
SV 125
4016589