Inova SV 125 Operating Manual page 184

5.2.47 Format input - - Filling curve vacuum (piston pumps) [3/4]
Touch control field
ton pumps) [2/4].
The parameters for the needle stroke during vacuum filling can be entered.
Needle stroke:
Evacuate position [mm]
Entry of the filling needle position in downward movement, where the vacuum valve
is switched on.
Delay start shaking [ms]
Delay for the shaking of the filling needle.
Position vacuum off [mm]
Entry of the position where the vacuum is switched off. The position is on the up-
ward movement of the filling needle.
Shake - - Upper position [mm]
Upper position for shaking the filling needle.
Version 1.0
5--98
on screen Format input - - Filling curve vacuum (pis-
Operation
SV 125
4016589