Inova SV 125 Operating Manual page 287

Operation
SV 125
4016589
PS: position actual [mm]
The current position of the pump stroke is displayed.
NS: position actual [mm]
The current position of the needle stroke is displayed.
PL: position actual [mm]
The current position of the stopper insertion rods is displayed.
TU: position actual [mm]
The current position of the insertion tubes is displayed.
SW: position actual [°]
The current position of the stopper turning device is displayed.
X: position actual [mm]
The current position of the X--axis is displayed.
Y: position actual [mm]
The current position of the Y--axis is displayed.
Control field
Screen Main screen is called up.
The machine drive is switched off.
The previous screen is called up.
Function
Version 1.0
5--201