Inova SV 125 Operating Manual page 203

Operation
SV 125
4016589
Stopper setting position (error vacuum) [mm]
The stopper insertion position in case of vacuum faults is entered.
Stopper setting speed (down) [%]
The speed for the downward movement during stopper insertion is entered.
Stopper setting speed (up) [%]
The speed for the upward movement during stopper insertion is entered.
Stopper setting position (error vacuum) [mm]
The stopper insertion position in case of vacuum faults is entered.
Position evacuate [mm]
Display of the position where the evacuation of the syringe starts.
Position vacuum off [mm]
Entry of the position where the vacuum is switched off.
Position lower border vacuum [mm]
Entry of the lower position from the stopper insertion rod to the insertion tube.
Stopper swivel arm:
Position front [°]
The front position of the stopper turning device is entered.
Position rear [°]
The back position of the stopper turning device is entered.
Version 1.0
5--117