Inova SV 125 Operating Manual page 167

Operation
SV 125
4016589
Position master (MD3)
The current master position (MD3) is displayed.
Pump stroke no.
Display of the current pump stroke.
Step point no.
Display of the current step point.
NOTE
An example for the entry of step points can be found in chapter
5.2.44.4, page 5--86.
Changing a parameter
Determine the value through teach--in, see chapter 5.2.60, page 5--137.
1
Touch the input field of the parameter that should be changed.
2
Enter the determined value on the keyboard.
3
Touch control field
4
Control field
Screen Format input - - Menu teach servo axes is called up.
A test filling is performed.
Preparatory operations:
A spillage tray has been placed under the filling station.
By touching this control field the pump module automatically moves to
one step point after the other. During that process dosing is performed
in steps.
Screen Format input - - Filling curve (piston pumps) [help] is called
up.
The screen serves for information only.
on the keyboard to take over the entry.
Function
Version 1.0
5--81