Copying a format
Touch input field Source.
1
Enter the number of a VALID format on the numeric keypad.
Touch control field
Touch input field Destination.
2
Enter the number of the new format on the numeric keypad.
Touch control field
Touch control field
3
NOTE
Before the copying process starts, it is checked, if a format with the
number of the new format already exists. If the format already exists, it
is only overwritten after confirming the security check.
Control field
The new format is created.
An already existing format is overwritten.
The copying process is aborted.
The machine drive is switched off.
Screen Main screen is called up.
The previous screen is called up.
Version 1.0
5--54
on the numeric keypad to take over the entry.
on the numeric keypad to take over the entry.
to create the new format.
Function
Operation
SV 125
4016589