Alarm 30501
Fault BUS participant sercos axis needle stroke
Fault BUS participant sercos axis pickup station nest
Fault BUS participant sercos axis pump rotation
Fault BUS participant sercos insertion rod
Fault BUS participant sercos insertion tube
Fault BUS participant sercos pump stroke
Fault BUS participant sercos swivel arm
Fault BUS participant sercos X- -Axis
Fault BUS participant sercos
Cause
No communication between indic-
ated Profibus--address and control
unit.
Alarm 31032
Operation not active batch
Cause
Batch not started.
Version 1.0
8--10
Action
Check lines and plug connections.
Check module (hardware) of the de-
central periphery.
Turn the POWER supply disconnect-
ing device off and on again.
If you cannot eliminate this fault,
please contact OPTIMA GROUP
pharma.
Action
Start batch.
Troubleshooting
SV 125
4016589