Mode of procedure
Precondition is machine standstill.
1.2.2.1
POWER supply disconnecting device
Set POWER supply disconnecting device to OFF "0".
S
The display must be blank.
1.2.2.2
Compressed air supply disconnecting device
Turn off compressed air supply disconnecting device.
S
Message "Compressed air missing" is displayed.
The machine cannot be started.
1.2.2.3
EMERGENCY STOP buttons
Press each EMERGENCY STOP button individually.
S
Message "EMERGENCY STOP pressed" is displayed.
The machine cannot be started.
1.2.2.4
Guard doors
Open each guard door individually.
S
Message "Guard door open" is displayed.
The machine cannot be started.
Version 1.0
1--8
Safety regulations
SV 125
4016589