Using A Scanner Supported Application - Oki MC363 Advanced Manual

Using a Scanner Supported Application

For TWAIN Applications
This section describes how to start scanning from a TWAIN application (Adobe Photoshop,
etc.) installed on a computer.
The procedure when scanning with Adobe Photoshop on a computer connected via a USB
cable to the machine is used as an example.
Scanning
1
Set a document in the ADF or on the document glass.
2
Set the scan mode on the operator panel.
For details, refer to "Setting PC Scan mode" in "Changing the Machine Settings"
3
Start Adobe Photoshop on the computer.
4
Click [Import] from [File], and then select the scanner driver of the machine.
5
Click [Scan].
6
Select [Simple] or [Advanced] from [Mode].
7
Change the setting if necessary. If [Simple] is selected, click [Settings] and
change the settings for the scan button.
8
Click a scan button.
The screen image shows the setting screen when [Simple] is selected.
9
Click [Quit].
10
If you do not scan other pages or the back side, click [Quit].
The five buttons ([Scan Photograph], [Scan Magazine], [Scan for OCR], [Scan for Internet], [Customize]) are
registered as the default settings.
For WIA Applications
This section describes how to start scanning from a WIA application (Adobe Photoshop, etc.)
installed on a computer.
The procedure when scanning with Adobe Photoshop on a computer connected via a USB
cable or WSD Scan connection to the machine is used as an example.
- 69 -
3. Scan