Initializing The Network Settings - Oki MC363 Advanced Manual

Initializing the Network Settings

• Initializing from Setting Menus of this Machine
• Initializing from the Operator Panel of this Machine (Boot Menu)
This procedure initializes all the network settings.
Initializing from Setting Menus of this Machine
You can restore the network settings to the factory default settings.
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the or button to select [Network Menu] and press the
5
Check that [Network Setup] is selected, and then press the
6
Press the button to select [Factory Defaults] and press the
7
When [Execute] is displayed, press the
8
Press the or button to select [Yes] on the confirmation screen, and
press the (OK) button.
Initializing from the Operator Panel of this Machine (Boot Menu)
If you cannot initialize from the configuration menu of this machine, you can initialize from the
operator panel.
1
Turn the machine on while pressing and holding "6" on the numeric keypad.
button.
(OK) button.
button.
button.
button.
button.
- 334 -
2
When the Boot Menu screen is displayed, press the
3
Enter the administrator password, and then press the
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Check that [Network Factory Defaults] is selected and press the
button.
5
Check that [Execute] is selected, and then press the
6
Select [Yes] on the confirmation screen, and press the
7
Press the button to go back to the standby screen.
10. Network
(OK) button.
(OK) button.
(OK)
(OK) button.
(OK) button.