Saving Scanned Data to USB Memory
To save scanned data to USB Memory, follow the procedure below.
1
Press the
(SCAN) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Insert USB Memory into the USB port.
Insert USB Memory straight into the USB port. Inserting USB Memory at a wrong angle may damage the USB
port.
4
Press the
button to select [USB Memory] and press the
5
Set scan settings if necessary.
6
Press the
(MONO) or
7
When a message is displayed to inform you that you can remove USB
Memory from the port, remove it.
button.
(COLOR) button.
- 72 -
3. Scan