Oki MC363 Advanced Manual page 274

• USB Memory Setup
Item
File Name
• TWAIN Setup
Item
Network TWAIN
2
Port No.*
• WSD Scan Setup
Item
WSD Scan
Binding
• PC Scan Mode
Item
PC Scan Mode
• Scanner Adjust
Item
Scanner Calibration
Factory Description
default
setting
(NULL) Sets the default file name. You can enter up
to 64 characters.
The following options can be set as the
default file name.* 1
#n: adding a serial number from 00000 to
99999
#d: adding the date of a file creation
(yymmddhhmmss)
(yymmddhhmmss)
Factory Description
default
setting
ON Sets whether to use the Network TWAIN.
9967 Sets the port number.
Available range: 1 to 65535
Factory Description
default
setting
Enable Specifies whether to use WSD Scan.
Long Edge Bind Sets the default binding position.
Factory Description
default
setting
Simple Scan Selects the default PC scan mode.
Mode
Factory Description
default
setting
Execute Executes scanner calibration.
Item
Adjust Scan FBS Side Reg.
Position
Front Edge
ADF(Front- Side Reg.
side)
Front Edge
Back Edge
ADF(Back-side) Front Edge
Back Edge
Adjust ADF Scan Position
*1 For profiles, "#n" or "#d" can be specified for [File Name].
If specifying "#n": 5-digit serial number from 00000 to 99999
If specifying "#d": Date and time when a file is created. 12-digit number in
yymmddhhmmss format
yy: Year created (the last two digits of
the Christian Era)
mm: Month created (01 to 12)
dd: Date created (01 to 31)
* The date and time when a file is created are values of the timer of MC563.
An example of file name specification (if the file format is PDF)
If specifying "Data#n": Saved as file names such as "Data0000.pdf" and
"Data00001.pdf".
If specifying "File#d": Saved as file names such as "File090715185045.pdf".
If specifying "Scan": "Scan.pdf" is created first, and then data is saved with the name of
"Scan#.pdf".
For "#d", refer to the above.
*2
To enable the changed setting, the network card must be restarted. Follow the
instructions on the confirmation screen that is displayed when changing the settings,
and restart the network card.
- 274 -
9. Operating Management/ Specifications
Factory Description
default
setting
0 Adjusts the reading position at the document
glass and the ADF.
0
When the scanning result is missing the
0
document edge or reads the shadow of the
0
document edge, carry out the adjustment of
the setting value.
0
1 step: 0.17mm
0
0
0
hh: Hours created (00 to 23)
mm: Minute created (00 to 59)
ss: Second created (00 to 59)