Oki MC363 Advanced Manual page 376

Item
Security Protocol ON/OFF
IP Filtering
MAC Address Filtering
SSL/TLS
IPSec
WebPage Authentication Method
Maintenance Reset/Restore
Network Scale
• Copy Setup
You can set the image quality, density, scan size, margins, edge erase, duplex, and other
settings.
• Fax Setup
Description
Stops a network protocol and network
service that are not used.
Restricts access by using IP
addresses. Access from outside your
company is also supported. However,
this function requires sufficient
knowledge about IP addresses.
Some settings may result in serious
• FaxServer Function
problems that prevent you from
accessing the machine via a network.
Restricts access by using MAC
addresses. Access from outside your
company is also supported. However,
this function requires sufficient
knowledge about MAC addresses.
• Internet Fax Setup
Some settings may result in serious
problems that prevent you from
Sets Internet Fax.
accessing the machine via a network.
Encrypts communications between a
• Scanner Setup
computer (client) and the machine.
Sets the encryption for
communications between a computer
(client) and the machine, and settings
to prevent tampering.
Sets WebPage Authentication
Method.
Restarts and resets a network. Even
if you access the Web page from the
Web browser after restarting, the
Web page is not displayed until the
restart is complete. Resetting
restores the IP address to its default
status, resulting in information you
manually set being lost. In such a
• Print From USB Memory Setup
case, the Web page cannot be
displayed.
Set Print From USB Memory.
Improves operation efficiency on a
network. This setting is very effective
when a hub that has the spanning
tree function is used, or a computer
and the machine are connected one-
on-one with a cross cable.
- 376 -
Item
Default Settings
Security Function
Other Settings
Item
Environmental Settings
Default Settings
Security Function
Item
Default Settings
E-mail Setup
USB Memory Setup
TWAIN Setup
WSD Scan Setup
PC Scan Mode
Scanner Adjust
Item
Default Settings
11. Utility Software
Description
Sets the image quality, density, and other default settings
for sending faxes.
Sets security for sending faxes.
Sets other settings for sending faxes.
Description
Sets the environmental settings.
Sets the default settings.
Sets the security settings.
Description
Sets the image quality, density, and other default settings
for scanning.
Sets e-mail settings that are required for performing
Scan to E-mail.
Sets USB Memory settings for performing Scan to USB
Memory.
Sets TWAIN.
Sets WSD Scan.
Sets PC Scan mode.
Sets Auto Color Judge Level and Blank Page Skip Level.
Item Description
Sets default settings when printing from USB Memory.