Table of Contents
Advertisement
Specifying a Destination from Transmission History and
Reception History
You can select a destination from the most recent 50 records in the transmission history or
reception history.
The reception history that is displayed on the panel shows receptions with Fcode polling only.
Performing Confidential Communication and Bulletin Board Communication (Fcode Communication)
1
Press the
(FAX) button on the operator panel.
2
Set a document in the ADF or on the document glass.
3
Check that [Fax] is selected, and then press the
4
Check that [Add Destination] is selected, and then press the
5
Press the
or
button to select [Tx History] or [Rx History], and then press
the
button.
6
Press the
or
button to select number, and then press the
button.
The check box is selected.
You can select multiple destinations.
7
When you select all destinations needed, press the
8
When [Complete] is displayed, press the
To delete a specified destination,
Deleting a Specified Destination
9
Press the
(MONO) button.
button.
button.
(OK)
button.
(OK) button.
- 130 -
Deleting a Specified Destination
This section describes how to delete destination before sending a fax (before pressing the
(MONO) button).
1
Press the
button to select the field in which the destination is entered, and
then press the
(OK) button.
The entered destinations are listed.
2
Press the
or
button to select destinations to be deleted, and then press
the
(OK) button.
The check box is selected.
You can select multiple destinations.
3
When you select all destinations needed, press the
4
Check that [Delete The Address] is selected, and then press the
button.
5
Press the
button.
If you have deleted all the destinations, the screen automatically returns to the
•
standby screen.
If you do not delete all the destinations, press the
•
screen.
5. Fax
button.
(OK)
button to go back to the standby
Advertisement
Table of Contents
